|
Monster Cable QL GAS-H QuickLock Gold Angled Spade Connectors (2 Pair)
Monster Cable Product Details |
 Enlarge View
|
List Price:
Featured:
Compare: |
$19.99
$19.95
$14.95 |
|
Monster Cable
|
Avg. Customer Review: 
Media: Electronics
|
|
|
|
| Price: $19.95 |
| Availability: Usually ships in 1-2 business days |
|
from $14.95 |
|
|
|
|
Monster Cable QL GAS-H QuickLock Gold Angled Spade Connectors (2 Pair)
- Two piece screw-on design for easy and reliable crimpless and self crimping termination.
- 24k gold contacts for maximum signal transfer and corrosion resistance.
- Wider base minimizes shorting for maximum signal transfer.
- Special teeth and ring-lock for strong grip that stays tight for optimum signal transfer.
- Precision-machined flat undersides for maximum contact and superior signal transfer.
Product Description
Speaker wire is made from copper wire that can corrode very quickly, rapidly deteriorating the performance of your cables and the overall performance of your system. To avoid this, always terminate your speaker wire with connectors. The kind of connector you need varies with the kinds of connectors on the back of your amp/receiver and your speakers. Monster's QuickLock connector system is the fastest, easiest way to install the right connector to your speaker cable for maximum performance and reliability. PRODUCT FEATURES: Two piece screw-on design for easy and reliable crimpless and self-crimping termination; 24k gold contacts for maximum signal transfer and corrosion resistance; Wider base minimizes shorting for maximum signal transfer; Special teeth and ring-lock for strong grip that stays tight for optimum signal transfer; Precision-machined flat undersides for maximum contact and superior signal transfer.
|
Click on Product Listings for Details!
Monster Cable QL GAS-H QuickLock Gold Angled Spade Connectors (2 Pair)
- Electronics: 0 pages
- Publisher: Monster Cable
- Label: Monster Cable
- Studio: Monster Cable
- Average Customer Review: based on 6 reviews
Click on Product Listings for Details!
Avg. Customer Review:
0 of 1 people found the following review helpful:
Customer Rating: 
Summary: Monster spade speaker connectors 2008-11-30
Comment: Hearing the right sound is very important and monster spade connectors produces the exact signal to the speaker which is crisp and clear.
0 of 4 people found the following review helpful:
Customer Rating: 
Summary: Requires extra parts 2008-11-02
Comment: should tell you that this requires 2-3 extra parts to use this... should be a package.
0 of 0 people found the following review helpful:
Customer Rating:
Summary: Good spade connectors 2008-02-15
Comment: I needed to biamp my speakers and my amp has single connectors for each channel, requiring that I double up on the connectors and wires at the amp side. Therefore, something flat, like a spade, was required. Also, since I'm using 12 gauge wires, I needed a connector that would accept wire that large. The Monster Cable spade connectors fit my needs, are heavy duty and, after some careful assembly, they did work for my application.
Pros: the connection is solid and if the wire is stripped to the length suggested in the instructions, they fit is secure. Stripping too little will result is a poor connection and stripping too much will make it difficult to assemble the barrel. The connector is well made and has gold plated surfaces for good conductivity.
Cons: The barrel is wide. That makes it easy to tighten but makes it clumsy for biamping two barrels on one amp terminal. I had to offset each connector almost 45 degrees to get two on one terminal on my amp. Since the spade part is also large, this leaves about 1 mm free space between the edges of each spade on the channels. Consequently, I had to be very careful not to short anything out. The serrated surfaces of the spade make for a great grip and tight connection but that same grip makes it more difficult to unscrew the nuts on the speakers without spinning the connection.
1 of 1 people found the following review helpful:
Customer Rating:
Summary: Quick but know your cables 2007-12-27
Comment: I bought these to attach my Audioquest type 8 cables to my Pass Labs amp. If you have very stiff or thick cables I would not try to use these, too difficult to bend the strands down for the crimp lock. These are designed for multi-strand with many thin strands.
Second, do not try to bend the spades to get a different angle. I tried cause they were sticking up too far to clear my amp's cable connection wingnuts. They snap off.
Know your equipment and cables before you buy these, would be great for typical Monster cable.
1 of 1 people found the following review helpful:
Customer Rating:
Summary: Dissapointed with spade style, returned for banana 2007-07-05
Comment: Audiophiles seem to prefer the spade style, but I found that the slightest movement of the speaker cable will loosen the nut on the speaker binding post. I returned these connctors for the banana style of the same monster model, and am very happy with these.
|
|
|
Electronics 
