|
Classic Accessories 71367 Deluxe Snow Thrower Cab
Classic Accessories Product Details |
 Enlarge View
|
List Price:
Featured:
Compare: |
$89.99
$78.99
$78.99 |
|
Sales Rank: 508
Classic Accessories
Released: 2004-12-23 |
Avg. Customer Review: 
Media: Tools & Hardware (1)
Color: Black
|
|
|
|
| Price: $78.99 |
| Availability: Usually ships in 1-3 weeks |
|
|
|
| Price: $89.99 |
| Availability: Usually ships in 24 hours |
|
from $78.99 |
|
|
|
|
Classic Accessories 71367 Deluxe Snow Thrower Cab
- Deluxe snow thrower cab offers roomy protection for operator
- Shelters user from worst winter weather and heavy snow blow back
- Heavy black fabric shell with freeze-resistant, super-clear vinyl windows
- Rugged steel tube frame with powder-coated finish
- 30-by-28-by-50 inches (LxWxH)
Amazon.com Product Description
The Classic Accessories deluxe snow thrower cab provides roomy protection for the person operating the snow thrower, sheltering the user from the worst winter weather and heavy snow blow back. The cab is built with a heavy black fabric shell, a rugged steel tube frame with powder-coated finish, and freeze-resistant, super-clear vinyl windows for added durability and convenience. This product measures 30 inches long, 28 inches wide, and 50 inches wide.
|
Click on Product Listings for Details!
Classic Accessories 71367 Deluxe Snow Thrower Cab
- Tools & Hardware: 0 pages (2004-12-23)
- Publisher: Classic Accessories
- Label: Classic Accessories
- Studio: Classic Accessories
- Average Customer Review: based on 36 reviews
- Sales Rank in Tools: #508
Avg. Customer Review:
0 of 0 people found the following review helpful:
Customer Rating: 
Summary: Face Saver 2008-11-15
Comment: Classic Accessories 71367 Deluxe Snow Thrower Cab After reading the directions, I carefully laid out the parts. Than started assembly according to directions, all went very well. I was finished in about 2 hours. The Cab was a little tight, but after reading the reviews before starting, I left the Cab in the house to warm up. I am sure this helped considerably, I am very satisfied.
bobretired in Northern New York on the Canadian border.
0 of 0 people found the following review helpful:
Customer Rating:
Summary: Classic Accessories 71367 Deluxe Snow Thrower Cab 2008-11-09
Comment: Decent quality, reasonable price. I have a Simplicity Pro series with the C channel frame, so it took some time figuring out how to mount it as it's designed for tube frames. Four large "U" bolts and some 1x2 shims took care of it. Took a bit of stretching and jockeying aroung the cover to get it to fit the frame, but eventually I worked it into place correctly. Definitely need the counterweight to avoid having a gust of wind cause a "wheelie". Overall, very satisfied with my purchase, would buy it again.
0 of 0 people found the following review helpful:
Customer Rating: 
Summary: Does not fit ALL 2008-10-19
Comment: This "cab" doesn't in any way fit ALL 2 stage snowthrowers as claimed.
It could be better helped in the assembly by color coding the parts instead of UF or LF, etc. It is by no means able to be assembled in 30 min.
0 of 0 people found the following review helpful:
Customer Rating:
Summary: Snowblower Cab Installation 2008-04-16
Comment: I purchased this Classic Accessories Deluxe Snow Thrower Cab #71367 back on December 18, 2007. After reading some of the other reviews I decided to install the cab when the weather was around 60 degrees because of the trouble trying to stretch the canvas around the frame. On April 15, 2008 I started at 2:30 PM and finished at 6:00 PM. I took my time rather than rush only to have to redo it right the next time.
I didn't realize that there were twelve extra U shaped clamps out of the sixteen that came with the kit, there also was extra bolts and nuts. The frame went together fairly fast altho if there were strips of color coordinated tape on the metal frame pieces (red to red, green to green, etc) my time on this phase could have been drastically reduced. I plan on drilling holes through the horizontal pipes and the handlebars to secure this as a unit to the snowblower, as soon as I get bolts and lock nuts at a hardware store.
The canvas and plexiglass cover was next. The first corner in the back went together very easily, there were three snaps and velcro from top to bottom. Then the two front pipes were more difficult to secure with the velcro strips because the canvas didn't seem to fit. But then that last back corner, WOW!! the canvas was at least five to six inches short to wrap around that vertical pipe. I tried for over an hour but couldn't get it to even come close. Then I grab a 12" clamp with rubber covered jaws and clamped that on to the canvas and used that as a fabric stretcher, I could easily get 2" more than what I needed.
The quality of sewing and the craftsmanship of the metal work was excellent. The design of the cab to easily fit any snowblower was also amazing. An almost similar cab except in red canvas and half a dozen symbols and trademarks saying Toro cost over $250 at a Toro dealership. There is more than enough room inside the cab for using the controls. Also there seems to be no problem walking behind the snowblower and keeping it under control. The height of the cab could easily accommodate a six footer with no feeling of restriction. It doesn't seem top heavy even tho it is about 7' tall. I like the design when needed to remove the entire cab with only two pins. I may add a 12 - 14 inch plexiglass flap at the top back with snaps or velcro to keep the swirling snow out of my neck.
The only area that MIGHT be a problem is the clearance between a horizontal pipe and the tires. My snowblower is a 12 horse - 32" wide Toro and one of the features - the tires swing back 10" to give more weight to the front or then back to normal to balance the weight on the tires. When I fastened the lower horizontal pipe to the handlebars there was less that 1/2" clearance between the tires when they are swung toward the back. There was no other place for this pipe to go because of the protrusion of the engine between the handlebars, the gear housing for the discharge shoot, and the transmission shift rod. Hopefully this may not be a problem, but this could be a rather easy fix for me. BJ
0 of 0 people found the following review helpful:
Customer Rating:
Summary: dway 2008-03-23
Comment: This cab is great for keeping the snow from blowing back on to you when using your snow thrower. It is involved putting together and you have to take your time. In addition, it does add size (width and height) to your snow thrower frame. I am glad to have it now.
|
|
|
Tools 
