Product Description
1.5 HP single-stage dust collector has powerful TEFC induction motor and blower for long-lasting, smooth performance.
Features sturdy steel base with four easy-glide wheels for moving from machine to machine or for storing out of the way. Uses standard 1 micron filtration bags. Snap-in bag rings eliminate need for cam-over-lock style clamps. 6 mil plastic chip collection bags. Motor housing can be mounted with dust ports facing up or down.
With two 4" dust ports. Comes with four swivel caster assemblies, cord and plug, and instruction manual.
Amazon.com Review
A small footprint and big power - that's what you get with this Delta dust collector. It takes up so little room because its volume is vertical, not horizontal. Standing 83 inches tall, it takes up just about 4-1/2 square feet of floorspace, but its 3,450 rpm motor moves a maximum of 1,200 cubic feet of air per minute. The small footprint is valuable in the home workshop, where space is often at a premium, but it's beneficial, too, because this machine is on rugged casters, and its size lets you move it wherever you need it in your shop, from the jointer to the planer to the saw to the sander. If you're fortunate enough to have a ducting system and blast gates in place, this machine stows easily in a corner and does all the work from there. It's rated at 88 decibels, but it's quite a bit more tolerable than a shop vacuum, we think. Assembly is minimal; expect about 45 minutes and a little frustration if you're going it alone. The only tricky part, as with any dust collector assembly, is mounting the plastic collection bag. There are two different rings to choose from; use what works for you. The upper bag filters down to 1 micron, which is a millionth of a meter, keeping the air and your lungs clear of dangerous contaminants. The collection bag is made of tough, 6-mil clear plastic, and we've really come around on the plastic bags from not liking them to, well, thinking they're a good idea. Exhaust goes through the filter bag, not the collection bag, so no air (or debris) escapes, and you can easily see when the bag needs emptying without waiting for performance to falter. There's a nice option for installation, too, that we haven't seen on other models: You can install the blower housing with the outlet ports facing up or down, depending on your ducting system and shop needs. And yes, you can use both ports at once - it's that powerful. We think this is a great investment for the home workshop or small professional shop, and your lungs are definitely worth it.--Kris Jensen-Van Heste
|
Tools 
Enlarge View
