|
Porter-Cable PTA23 2.2mm Nozzle Kit (PSH1)
Porter Cable Product Details |
 |
List Price:
Featured:
Compare: |
$48.06
$25.88
$25.88 |
|
Sales Rank: 2213
Porter Cable
|
Avg. Customer Review: 
Media: Tools & Hardware
|
|
|
|
| Price: $25.88 |
| Availability: Usually ships in 3-5 weeks |
|
|
|
| Price: $28.27 |
| Availability: Usually ships in 24 hours |
|
from $25.88 |
|
|
|
|
Porter-Cable PTA23 2.2mm Nozzle Kit (PSH1)
- One 2.2-mm nozzle kit for use with the Porter-Cable PSH1 spray gun
- Ideal for use with medium to high solids
- For use with latex, acrylics, enamels, urethanes, primers, and epoxies
- Works with the PSHI for precise operation
- Weighs 4.8 ounces
Product Description
For use with PSH1. Spray medium to high solids including latex, acrylics, enamels, urethanes, mastics, heavy primers, sealers, fillers and epoxies.
|
Click on Product Listings for Details!
Porter-Cable PTA23 2.2mm Nozzle Kit (PSH1)
- Tools & Hardware: 0 pages
- Publisher: Porter Cable
- Label: Porter Cable
- Studio: Porter Cable
- Average Customer Review: based on 3 reviews
- Sales Rank in Tools: #2213
Avg. Customer Review:
17 of 17 people found the following review helpful:
Customer Rating:
Summary: Buy this nozzle for latex applications 2007-01-10
Comment: If you are spraying a latex product with an HVLP air sprayer, don't even bother with the 2.0mm nozzle kit - go straight to the 2.2mm Nozzle Kit. I have the Porter Cable HVLP air sprayer and I originally bought the 2.0mm nozzle and it would only work if I really watered down the paint. The problem with that is I hardly got any coverage and it was very runny.
So then I went with the 2.2mm Nozzle and I didn't have to thin the paint if I didn't want to. However, it did spray a little bit better when I added about 5-10% water and 10% Floetrol @ 45 PSI. The Floetrol will make the paint lay more evenly.
So if you need to spray latex paint, buy the 2.2mm Nozzle right away and you won't be disappointed.
9 of 9 people found the following review helpful:
Customer Rating:
Summary: Minnesota Charlie 2006-07-11
Comment: I purchased the PSH1 sprayer based on the positive reviews of others. They suggested a large nozzle and so I had to choose between the 2.0 and 2.2. I went with the larger and the results are good. I sprayed the interior walls with latex KILZ then two coats of exterior latex house paint. I thinned the primer and paint at 10% with water and no trouble with plugging or spattering, nice finish to treated plywood, OSB, and pine board. I used a Makita MAC 2400 compressor to supply the air. Very glad I bought the sprayer because it saved me hours of labor if I used a roller and brush.
14 of 14 people found the following review helpful:
Customer Rating:
Summary: Works great on my Harbor Freight 43430 Gun 2005-08-14
Comment:
I own a Harbor Freight 43430 spray gun that is only available with a 1.3mm nozzle. HF does not offer other nozzles for the 43430. I had heard that the HF gun was identical to the PC PSH1 gun. While I do not know if they are identical, the PC 2.2 nozzle fits the HF 43430 perfectly and allows me to spray thicker coatings that are difficult/impossible to spray with the 1.3mm nozzle that comes with the HF 43430.
|
|
|
Tools 
